寻求一些KODAK8900相机的相关手册和维修经验

前辈们好：本人急需KODAK8900相机的维修资料和相关经验，谢谢！

相关的帖子自己在网站搜索，维修手册本站有，交换就可以了。

很抱歉。yeec先生记错了我们所拥有资料的信息。他估计记得是9800的资料了。KODARK8900激光相机的资料到目前为止联盟还没有。

这个相机体积巨大，上市不久，大部分机器都在保修期内，维修资料除了柯达公司的人员以外，其他人员基本上没有得到的可能。

这个机器经常出现的是光学系统校准失败的问题。需要用专用的设备来调整激光头移动的轨道的位置。我们有2台此机器，保内调整了多次，不胜其烦。目前正和柯达公司交涉，希望能有个圆满的答复。

不知道其他用户是否也有此种体会，欢迎讨论。

谢谢斑竹！希望大家能够进行讨论，我会努力寻找资料同大家共享的！

Page
3 of 279
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
DICOM Status Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
LOCAL PANEL Status Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
LOCAL PANEL Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Subsystems in the 8900 LASER IMAGER . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Error Severity Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Error 00-099, 100, 106, 109, 165, 251, 252, 253, 255, 261, 300, 308, 530: Error
in General Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Error 01-001,100, 507, 508, 551, 552, 555 through 559, 660, 661, 664, 667, 669,
671, 880, 885, 890, 901, 902, 903, 904, 906, 909, 910: Error in Service
Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Error 02-104: Job Request too Large for Space Available on DISK. . . . . 65
Error 02-202, 215, 217: Error in “Import Subsystem”. . . . . . . . . . . . . . . . . 66
Error 03-111: Rendering Error Caused by Image Data that is Not Correct 67
Error 03-650: Delivery Error in Routing/Delivery Subsystem . . . . . . . . . . 68
Error 03-381, 392, 393, 395, 396, 397, 461, 462, 464, 466, 467, 469, 471, 472,
489, 494, 600, 601, 607, 614, 824, 825, 826, 902, 912: Error in “Routing/
Delivery Subsystem” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Error 04-004, 115, 118, 200, 204, 206 through 210, 211, 215: Error in DICOM/
Network Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Error 04-201: Maximum Number of DICOM Associations Exceeded . . . . 71
Error 04-205: Resource Limitation Error in Network Subsystem . . . . . . . 72
Error 05-000, 044: Error in Storage Subsystem . . . . . . . . . . . . . . . . . . . . . 73
Error 05-039: Not enough Space on DISK to Reach Low Water Mark . . . 74
Error 10-001: Internal Software Error in Delivery Server of DRE . . . . . . . 75
Error 10-003: Image Datapath Error in Delivery Server of DRE . . . . . . . . 76
Error 10-910: No Communication with the MCS . . . . . . . . . . . . . . . . . . . . . 77
Error 12-001: Software Error in LOCAL PANEL . . . . . . . . . . . . . . . . . . . . . 78
Error 12-002: Database Error in LOCAL PANEL . . . . . . . . . . . . . . . . . . . . . 79
Error 12-003: Internal Software Error in LOCAL PANEL . . . . . . . . . . . . . . 80
Error 12-075: LOCAL PANEL Error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Error 13-001: Internal Software Error in the SERVICE TOOL . . . . . . . . . . 82
Error 13-002: Database Error in the SERVICE TOOL . . . . . . . . . . . . . . . . . 83
Error 13-003: SERVICE TOOL Script Error . . . . . . . . . . . . . . . . . . . . . . . . . 84
Error 20-154: Internal Communications Failure: MCS . . . . . . . . . . . . . . . . 85
Error 20-156: Incompatible Software Versions Installed . . . . . . . . . . . . . . 86
Error 20-208: Door Open Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Error 20-209: Laser Imager Opened . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Error 20-550: Preventive Maintenance Required. . . . . . . . . . . . . . . . . . . . . 89
Error 20-912: DRE Data Transfer Parity Error . . . . . . . . . . . . . . . . . . . . . . . 90
Error 20-913: DRE Data Transfer Count Error . . . . . . . . . . . . . . . . . . . . . . 91
Error 20-914: DRE Data Transfer Fatal Parity Error . . . . . . . . . . . . . . . . . . 92

希望成为你的工作伙伴和朋友! 王工 13699668839

楼上的，这里谢了！很愿意能成为伙伴

8150相机出现打细条纹胶片的问题，问有可能是什么问题？需要检查什么备件？

以下是引用光子在2007-1-18 11:19:00的发言：
8150相机出现打细条纹胶片的问题，问有可能是什么问题？需要检查什么备件？

请您将故障描述清楚，横向还是纵向？偶发还是频发还是每张胶片均如此？换过胶片试过没有？......

最好有图片，否则同行们很难判断故障的。

我有8900的全部材料

[Error 20-915: DRE Data Transfer Fatal Count Error . . . . . . . . . . . . . . . . . . 93
Error 21-116, 22-116, or 23-116: “Film Pickup” Failure . . . . . . . . . . . . . . . 94
Error 21-117, 22-117, or 23-117:“Film Pickup” Retry . . . . . . . . . . . . . . . . . 96
Error 21-118, 22-118, or 23-118: PICKUP Did Not Move to the “Home”
Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Error 21-119, 22-119, or 23-119: PICKUP Did Not Contact Film . . . . . . . . 99
Error 21-120, 22-120, or 23-120: VACUUM CUPS Did Not Engage Film. . 101
Error 21-125, 22-125, or 23-125: FEED ROLLER Nip Failure . . . . . . . . . . 103
Error 21-126, 22-126, or 23-126: Film Jam in FEED ROLLERS . . . . . . . . 105
Error 21-135, 22-135, or 23-135: SUPPLY DRAWER Did Not Open. . . . . . 107
Error 21-139, 22-139, or 23-139: Unable to Read to or Write from RF TAG 108
Error 21-145, 22-145, or 23-145: “Unsupported Media Type” in CARTRIDGE
110
Error 21-146, 22-146, or 23-146: “Unsupported Media Size” in CARTRIDGE111
Error 21-175, 22-175, or 23-175: ROLLBACK Did Not Engage CARTRIDGE 112
Error 21-176, 22-176, or 23-176: FILM CARTRIDGE Did Not Open Fully . 114
Error 21-177, 22-177, or 23-177: FILM CARTRIDGE Did Not Close Fully. 116
Error 21-178, 22-178, or 23-178: FILM CARTRIDGE Did Not Open . . . . . . 118
Error 21-179, 22-179, or 23-179: FILM CARTRIDGE Did Not Close. . . . . . 120
Error 21-624, 22-164, or 23-164: “Film Density Readings” on Film Not
Monotonic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Error 21-631, 22-631, or 23-631: Dmin Requirement Not Met . . . . . . . . . . 123
Error 21-632, 22-632, or 23-632: Dmax Requirement Not Met . . . . . . . . . . 124
Error 24-154: CARTRIDGE CONTROL BOARD NVRAM Failure. . . . . . . . . 125
Error 24-931: CARTRIDGE CONTROL BOARD Communications Failure. 126
Error 24-932: CARTRIDGE CONTROL BOARD Communications Retry . 128
Error 25-154: RF TAG READER BOARD NVRAM Failure. . . . . . . . . . . . . . 129
Error 25-922: RF TAG READER BOARD Diagnostics Failure . . . . . . . . . . 130
Error 25-931: RF TAG READER BOARD Communications Failure . . . . . . 131
Error 25-932: RF TAG READER BOARD Communications Retry . . . . . . 133
Error 26-164: Film Jam Loading the FILM PLATEN . . . . . . . . . . . . . . . . . . 134
Error 26-165: Film Jam Exiting the FILM PLATEN . . . . . . . . . . . . . . . . . . . 135
Error 26-166: Film Jam in the VERTICAL TRANSPORT . . . . . . . . . . . . . . . 136
Error 26-167: Film Jam Entering the FILM PLATEN . . . . . . . . . . . . . . . . . . 137
Error 26-169: Film Jam Unloading the FILM PLATEN . . . . . . . . . . . . . . . . 138
Error 26-542: Film Jam in PROCESSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Error 26-543: Film Jam before Dd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Error 26-544: Film Jam in DENSITOMETER. . . . . . . . . . . . . . . . . . . . . . . . . 142
Error 26-545: Film Jam before SORTER. . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Error 26-546: Film Jam in SORTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Error 27-124: PLATEN LOAD MOTOR Failure . . . . . . . . . . . . . . . . . . . . . . . 150
Error 27-127: PLATEN SWEEP MOTOR Failure. . . . . . . . . . . . . . . . . . . . . . 152
Error 27-128: PLATEN CENTERING MOTOR Failure . . . . . . . . . . . . . . . . . 154
Error 27-154: OPTICS NVRAM Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Error 27-601: POWER MONITOR Offset Not “Valid”. . . . . . . . . . . . . . . . . . 157
Error 27-602: POWER MONITOR Range with ATTENUATOR Open Not “Valid”
158
Error 27-603: Optical Density Range for ATTENUATOR Not “Valid” . . . . 159
Error 27-604: “Laser Dynamic Range” Not Valid . . . . . . . . . . . . . . . . . . . . 160
Error 27-605: POWER MONITOR is Saturated . . . . . . . . . . . . . . . . . . . . . . . 161
Error 27-606: “POWER MONITOR Readings” Not Monotonic . . . . . . . . . . 162
Error 27-607: Maximum Laser Power Outside Valid Range. . . . . . . . . . . . 163
Error 27-608: Laser Dynamic Range Not Valid . . . . . . . . . . . . . . . . . . . . . . 164
Error 27-609: Optics Approaching Maximum Laser Power . . . . . . . . . . . . 165
Error 27-611: Optics Laser Gain Adjustment Malfunction . . . . . . . . . . . . . 166
Error 27-640: Optics Translation Did Not Move to the “Home” Position. 167
Error 27-641: Optics Translation Did Not Reach Limit . . . . . . . . . . . . . . . . 168
Error 27-642: Optics Translation Reached Limit too Soon . . . . . . . . . . . . 169
Error 27-643: Optics Translation Diagnostic Failure . . . . . . . . . . . . . . . . . 170
Error 27-645: Optics Translation Motion Failure . . . . . . . . . . . . . . . . . . . . . 172
Error 27-646: “Start of Page” Error. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Error 27-647: OPTICS LINEAR MOTOR CONTROLLER Re-initialization . 175
Error 27-912: Optics Image Data Transfer Parity Error . . . . . . . . . . . . . . . 176
Error 27-913: Optics Data Transfer Count Error . . . . . . . . . . . . . . . . . . . . 177
Error 27-914: Optics Image Data Transfer Fatal Parity Error . . . . . . . . . . 178
Error 27-915: Optics Data Transfer Fatal Count Error . . . . . . . . . . . . . . . . 179
Error 27-916: Optics Detected FPGA Configuration Error . . . . . . . . . . . . . 181
Error 27-931: Optics Communications Failure . . . . . . . . . . . . . . . . . . . . . . 182
Error 27-932: Optics Communications Retry . . . . . . . . . . . . . . . . . . . . . . . 183
Error 28-154: PROCESSOR NVRAM Failure . . . . . . . . . . . . . . . . . . . . . . . . 184
Error 28-155: “Invalid” PROCESSOR Temperature Parameters . . . . . . . . 185
Error 28-501: PROCESSOR RTD Short Circuit . . . . . . . . . . . . . . . . . . . . . . 186
Error 28-506: PROCESSOR ROTATING BOARD Communications Failure 188
Error 28-551: PROCESSOR HEATER Failure. . . . . . . . . . . . . . . . . . . . . . . . 190
Error 28-554: PROCESSOR Over Temperature Error . . . . . . . . . . . . . . . . . 193
Error 28-931: PROCESSOR Communications Failure . . . . . . . . . . . . . . . . 195
Error 28-932: PROCESSOR Communications Retry . . . . . . . . . . . . . . . . . . 196
Error 29-154: DENSITOMETER NVRAM Failure. . . . . . . . . . . . . . . . . . . . . . 197
Error 29-924: DENSITOMETER DENSITY SENSOR Failed Offset Reading
During Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
Error 29-925: DENSITOMETER DENSITY SENSOR Faile

Section 3: Troubleshooting
System Problems
Description Cause Action
Error Code on LOCAL
PANEL
Machine control failure See the appropriate QuickSheet in
this manual.
DRE cannot communicate
with MCS (Error
code 910)
1. Incompatible software
between DRE
and MCS
2. Damaged SERIAL
CABLE
connection between
DRE and MCS
1. Use the SERVICE TOOL to
check MSC Micro versions. Select
Upgrade>Microcontrollers.
2. Check serial CABLE connections,
COM2 on DRE to J21 on
EBA.
Cannot connect SERVICE
LAPTOP with SERVICE
TOOL
1. SecureLink problem
2. Wrong type of network
CABLE.
1. Certificate end-date exceeded?
2. Use CROSSOVER CABLE.
Repeated film jams in the
same area of the IMAGER
Electrical or mechanical
failure. Jam will be
accompanied by an
Error Code.
1. See the appropriate Quick-
Sheet in this manual.
2. Use SERVICE TOOL to check
electrical components in area of
jam.
3. Cycle the transport and check
for mechanical problems,
Image quality problems See the Image Quality table below.

就到这吧

楼上的能不资料共享下吗？

希望大家多多共享啊。

好东西，共享一下吧

没人共享的，他们都靠这吃饭

8900最易出27-607，激光部件校准出错。


处理：
开机状态打开前门，关机。
开后门，拆开激光打印部件后面三组接插件，并取掉下面两颗螺丝，往前推出激光组件。
取下正上面一块电路板，露出一小方孔。
能看见一光亮的有斜面的小圆柱，用干净棉签清洁斜面，装机，OK

共享下哈