[求助]ABX pentra80 barcode tube read 故障

ABX PENTRA80  软件版本是V1.3.2。一个月以来，每天都会出现此报错。请高手指点，怎么处理？

报错：

Mismatch Between the First and Second Barcode Tube Read on Rack 7 Pos.8

Mismatch Between the First and Second Barcode Tube Read on Rack 9 Pos.3

Mismatch Between the First and Second Barcode Tube Read on Rack 3 Pos.10

Mismatch Between the First and Second Barcode Tube Read on Rack 6 Pos.1

Mismatch Between the First and Second Barcode Tube Read on Rack 5 Pos.1

Mismatch Between the First and Second Barcode Tube Read on Rack 2 Pos.8

Mismatch Between the First and Second Barcode Tube Read on Rack 2 Pos.10

Mismatch Between the First and Second Barcode Tube Read on Rack 9 Pos.4

Mismatch Between the First and Second Barcode Tube Read on Rack 6 Pos.9

Mismatch Between the First and Second Barcode Tube Read on Rack 2 Pos.4

Mismatch Between the First and Second Barcode Tube Read on Rack 5Pos.10

Mismatch Between the First and Second Barcode Tube Read on Rack 7 Pos.2

Mismatch Between the First and Second Barcode Tube Read on Rack 8Pos.7

Mismatch Between the First and Second Barcode Tube Read on Rack 1 Pos.2

Mismatch Between the First and Second Barcode Tube Read on Rack 3 Pos.6

上试管的时候把条码标签冲里安装，不要让条码阅读器扫描到。标签上写的乱七八糟的东西，被阅读器误读了。

但是医院要用扫描仪扫条码来读取试验号，用来与接收软件里面的病人数据匹配

那就把条码打印清楚，不要在上面乱写乱画。如果不是这个原因，检查条码阅读器的位置是否准确，必要时做出调整。

好，谢谢

今天去医院检查了一下，发现个别试管上的条码贴歪了，然后上架子时试管上的条码没有对准条码阅读器。