Sysmex K 1000: WBC Starts Slow ...Can some one help me?

WBC Starts Slow message is coming consistently in K 1000

I may need fluid diagram & some explanation too..

Can some one help me?

这种仪器在中国不多，而且也基本上淘汰了，很少有人见过并维修过。大概是计数时间过长，请检查是否堵孔，电磁阀堵塞，或者气泡干扰等等。

Description:The time required for the manometer ball float descending to reach the start level or descending from the start level to reach the stop level is longer than the specified range

Function:System secures the manometer operation

Check method:System checks that the time required for the manometer ball float descending to reach the start level is 4.0 seconds or less System also checks that the time required for the manometer ball float descending from the start level to reach the stop level is less than 9.0 seconds for WBC

Thank you...

But in this case no liquid movement is thre ...there is aparent crack that was glued on Manometer tube itself.

Could that be the reason? Can you send me Fluidics Sequence Diagram of K 1000?

我这里没有k1000的流程图和液路图，帮你找找看，也许其他同行有。

我有k--1000的所有的配件，需要可以联系我

qq--2665218

检查WBC检测部测试单元相关水路是否脏、堵、漏气。