[求助]CX5报错too many send reteries

zhangyi5202008 · 发表于 2009-5-14 20:10

注册登录才能更好的浏览或提问。

您需要登录才可以下载或查看，没有账号？立即注册

×

CX5老是报错too many send reteries红色警报，退出后自动进入关机界面，只好选修复从新启动仪器，很是苦恼，标本检测中经常出现，只好重启，求解决原因。

紫气东来 · 发表于 2009-5-20 14:53

联机上的问题。检查控制电脑的scsi卡、scsi传输线、仪器的scsi板子。

greatsss · 发表于 2009-5-21 23:12

ERROR MESSAGE: AFatal SCSI Note Too Many send Retries.

DESCRIPTION: After batch programming in barcode mode, manually assigning the samples to a sector, and opening an IDC channel the following message appeared, AFatal SCSI Note Too Many send Retries. The power supply and SCSI cables were OK. The system was rebooted and, after calibration, the run was completed successfully.

TO RECOVER: Reboot

舞指 · 发表于 2009-6-8 19:13

MEMO和CPU板子也要注意下

bluesky · 发表于 2009-6-30 19:26

我遇见过，报too many send reteries时候观察SCSI板的指示灯状态，如果是红的就有问题。

rocky · 发表于 2009-7-3 08:04

现整理一下数据库吧！

		自动登录	找回密码
密码			立即注册