|
附件里面是操作手册：
以下是对产品的介绍
be公司2006年产品 compact-xrc    –
Cap piercing– Classic coagulation and chromogen– 100% positive patient identification– Enhanced result tracing– Integrated cuvette waste disposal – View >> Software The new Linux-based software opens new horizons in database management and the processing of coagulation signals. No sacrifices are made to user comfort and convenience.
Full traceability All measurement-specific data (such as patient, reagent and test data – including reaction and calibration curves) is stored and can be viewed later to help troubleshoot causes for error flags and failed measurements.
Reagent level display The reagent section includes a display to quickly and easily view the reagent levels.
Reagent preparation The calibration curves can be saved together with the reagent information in a separate database. This is of assistance when changing batches.
User management A user-defined login and a graphical operating screen complete the software innovation.
Barcode When using collection tubes with barcode labelling, the system can be routinely operated solely by means of three keys located at the front of the instrument.
Cap piercing Cap piercing is a major highlight of Thrombolyzer XRC. Closed collection tubes increase safety for the operator and reduce work on handling samples to a minimum.
Cuvette bar A high dispensing precision is guaranteed even with the smallest plasma volumes. The newly developed cuvette bar features depots for intermediate plasma storage.
Working area The new working area has been designed to be open and easily accessible. Refilling reagents, samples or cuvettes during the running routine should pose no problems at all.
Waste disposal The integrated disposal system enables the hygienic disposal of used cuvettes. Sensors monitor the waste cuvette level and the instrument indicates when to empty the waste container.
The features: – Cap piercing– Sample throughput up to 160 tests/h (without cap piercing)– Sample throughput up to 120 tests/h (with cap piercing)– Chromogenic, immunological and coagulometric tests– Open system, suitable for almost all reagents– Derived fibrinogen – Positive patient identification, all commercial barcodes– Automatic pre-dilution – Automatic test repetition – Automatic calibration curve creation – Automatic level detection – Follow up test (reflex test) – Digitalised measuring results recording – 4 measuring channels – Operating system: LINUX– Interface: RS 232 or LAN – QC programme: Levy-Jennings graphics– Up to 30,000 patients' data, incl. reaction curves – Personal user login – Collection tubes – Integrated cuvette waste disposal – Supply range: Thrombolyzer, instrument accessories, computer, flat screen monitor.
Technical Data: – Mains voltage: 85 – 265 V– Frequency range: 47 – 63 Hz– Power consumption: 150 VA / 0.51 BTU/h– Dimensions: 730 x 560 x 380 mm (L x W x H)– Weight: 38 kg | 
