[求助]AXSYM报5064故障

无妄流痕 · 发表于 2010-7-29 16:16

您需要登录才可以下载或查看，没有账号？立即注册

×

开机正常，底版电压伏数均有，样品中心个部件工作正常。运行区的都没反应，直接报5064。运行中心针上下正常，前后错误（只进不出现象），其它运行区马达复位无任何反应。运行中心分配板上方绿灯区与正常相比24V没亮，请高手指点。

刘士军 · 发表于 2010-9-12 20:31

IP-51 EJECTOR FAILURES (ERROR CODES: 5020, 5042, 5064)


Related Links	G1.03 Aux Dist Bd	Ejector - Ejector.pdf
Related Links	VP-01 Service Log On/Log Off Procedure


Related Links	G1.03 Aux Dist Bd	IP-68 POWER SUPPLY FAILURES


Related Links	G3.10 Ejector


Related Links	C2.11 Dig I/O Bd #1 (on left) & #2


Related Links	G1.03 Aux Dist Bd	VP-45 Sensor Check
Related Links	G2.01 Process Dist Bd


Related Links	A3.04 Matrix Cell Crsl w/Flag	VP-08 Matrix Crsl Cleaning Procedure


Related Links	IP-68 POWER SUPPLY FAILURES


Related Links	VP-44 Motor Diagnostics using H:/> Prompt Commands


Related Links	C2.10 Motor Control Bd #1 (on left), #2, & #3	G3.10 Ejector
	C2.15 Power I/O Bd (Includes C2.13)	VP-38 MEIA Station Cal
	G1.03 Aux Dist Bd	VP-43 Matrix Cell Load Procedure
	G2.01 Process Dist Bd


Related Links	None

vincentecjl · 发表于 2012-10-11 09:47

报警：Homing failure, matrix cell ejector, processing center. 纤维杯的trap door有问题。有杯子没有掉进matrix carousel中？看看有没有杯子，取出来就行了。

		自动登录	找回密码
密码			立即注册