|
NOT ALLOWED TO DELETE SAMPLE (%s)
NOT ALLOWED TO DELETE REPEAT SAMPLE (%s)
PRINTER NOT SELECTED
POWER FAILURE DETECTED $T
RACK ID READ ERROR $T ($y,$02Bh)
ORIGINAL DETERGENT B EMPTY $T
ORIGINAL DETERGENT A EMPTY $T
DETERGENT B SHORT $T
DETERGENT A SHORT $T
DI WATER SHORT $T
DI WATER EMPTY $T
DETERGENT B OVERFLOW $T
DETERGENT A OVERFLOW $T
DI WATER OVERFLOW $T
R1 REAGENT REF. COVER OPEN $T
R2 REAGENT REF. COVER OPEN $T
INCUBATION. BATH/REAGENT REF. TMP. A/D ERRO
LAMP OFF $T
LAMP DARK $T
RACK RECEIVER FULL $T
NO RACK $T
NO STAT CUP $T
NO SAMPLE PROBE DETERGENT $T ($y)
ACAL INCOMPLETE $T
QC INCOMPLETE $T
RACK BUFFER JAM $T
RACK RECEIVER JAM $T
R1 REAGENT SHORT $T ($I,$y)
R2 REAGENT SHORT $T ($I,$y)
R1 REAGENT EMPTY $T ($S,$I,$y,$y)
R2 REAGENT EMPTY $T ($S,$I,$y,$y)
CLOT SAMPLE DETECT $T ($S,$I)
DETERGENT A EMPTY $T
DETERGENT B EMPTY $T
STAT COVER OPEN $T
PRE DILUTION WATER SHORT $T
PRE DILUTION WATER EMPTY LEVEL DETECT $T ($
RACK BUFFER COVER OPEN $T
NO SAMPLE CUP (%s-%s)
SAMPLE NOP (%s-%s)
REPEAT SAMPLE NOP (%s-%s)
CALIBRATION FACTOR RANGE OVER (%s) %c
CALIBRATION FACTOR RANGE UNDER (%s) %c
CALIBRATION OD RANGE OVER (%s) %c %d
CALIBRATION OD RANGE UNDER (%s) %c %d
CALIBRATION ERROR (%s) %c
QC DATA RANGE OVER (%s %02d %s %c)
QC DATA RANGE UNDER (%s %02d %s %c)
QC DATA CHECK ERROR (%s %s %c %d)
PANIC VALUE (%s-%s-%02d-%s)
REAGENT REF. TEMPERATURE LOW
REAGENT REF. TEMPERATURE HIGH
INCUBATION BATH TEMPERATURE HIGH
INCUBATION BATH TEMPERATURE LOW
STAT SAMPLE MEASURE START CANCELED
ILLEGAL PARAMETER (%s %d %d %d %d)
STAT TABLE TEMPERATURE HIGH
STAT TABLE TEMPERATURE LOW
REPEAT SAMPLE NO CUP (%s %s-%02d)
|
